Description
Which Gerflor interlocking tile is right for me? Between Gerflor’s GTI Max Connect, Attraction, & Creation 70 interlocking tiles there’s a few differences, so we’ve tried to outline them below for you:
| GTI Max Connect | Attraction | Creation 70 | |
| Wear Layer | 2mm | 1mm | 0.7mm |
| Thickness | 6mm | 5mm | 5mm |
| Rolling Load Limit | 3,000kg | 1,800kg | 750kg |
| Overall Quality | Best | Better | Good |
Gerflor advise that whilst Creation 70 states that it is suitable for use over ceramic tiles etc, from their experience these are never within tolerance enough to give a satisfactory finish so they always recommend a ‘billiard-table’ level of subfloor prep (clean, smooth, freshly screeded), similar to when installing sheet vinyl; the product (Creation 70) does not have the same flexibility or dovetail strength as GTI & Attraction.
Attraction® is a fast track easy solution with interlocking edges which allows for rapid loose lay installation and replacement. These loose lay tiles are cost effective as there is no need to close down the premises and can be installed on a sub floor with minimal preparation.
- Slip rating: R10
- Water resistant: Yes
- Total thickness: 5mm
- Wear layer thickness: 1mm
- Protecsol® 2 Treatment
- 1mm pure vinyl coloured wearlayer
- 4mm recycled backing with double glass fibre grid
- Easy renovated: looselay Installation
- No immobilisation of the premises = no loss of turnover
